Case 836 C AWD

CASE 836C AWD Price: 227 000 € without tax Year of manufacture: 2024 Mileage ONLY: 15 hours Weight: 12,800 kg 6-cylinder engine with 119 kW MANUFACTURER'S WARRANTY: 12 MONTHS OR 2,000 HOURS We also offer a model controlled by joysticks CASE 836C (AWD) Grader Technical Specifications Drivetrain: NEF diesel, 6-cylinder, type FPT F67 NEF STAGE V, common rail, turbocharged, intercooled, 6.7 l, meeting the latest Stage V "Hi-eSCR2" emissions standard; patented selective catalytic reduction system with AdBlue Power in gears 1-3: 102 kW (138 hp) according to ISO 14396/ECE R120; Power in gears 4-6: 115 kW (156 HP) according to ISO 14396/ECE R120; Torque: 725 Nm at 1,400 rpm; Full PowerShift transmission for shifting under load; Number of forward gears: 6 (Vmax = 39.9 km/h); Number of reverse gears: 3 (Vmax = 29.2 km/h); Torque converter with a gear ratio of 1.87:1; Tractive force: 85 kN Hydraulic system: ▪ Variable-flow axial piston pump, maximum capacity: 94.5 l/min; ▪ Closed-loop load-sensing system with a pressure of 200 bar enables very high precision; ▪ System capacity: 185 l; All-wheel drive: Hydrostatic front-wheel drive with E.D.C.V. (Electronic Drive Control Volume) system, engaged in addition to the hydrodynamic rear-wheel drive. A bidirectional pump controls the motors located in the front wheel hubs. A hydraulic No-Spin differential regulates torque and prevents wheel spin. A microprocessor monitors and matches the drive power between the front and rear wheels. A stepless switch allows the operator to adjust the front wheel traction to current operating conditions. Standard creep mode: front-wheel drive only for maintaining very low travel speeds. ▪ Hydraulically controlled steering system; ▪ Turning radius (at the edge of the wheels) – 6.6 m; ▪ Six equal-size wheels with 405/70 R20 tires; ▪ Wet disc braking system acting on all four rear wheels; ▪ Front drive axle (6WD): ▪ Hydrostatic front wheel drive controlled by an electronic speed control system (EDCV); Axle oscillation - ± 15°; Wheel tilt - ± 21.45°; Left/right steering angle - ± 40°; Frame angle - ± 28°; Ground clearance - 0.485 m; ▪ Tandem rear axle: Axle oscillation - ± 15°; No-spin automatic differential lock; 4-wheel drive via chains; Slewing ring: ▪ 360° rotation capability; ▪ Slewing ring diameter - 1.15 m; ▪ Enclosed slewing ring with internal lubrication of the slewing bearing, preventing contamination; Electrical system and cab: ▪ Voltage: 24 V; ▪ Alternator: 90 A; ▪ Battery: 2 x 100 Ah; ▪ Cold start system for easy engine starting in low temperatures; ▪ Spacious, comfortable ROPS/FOPS cab equipped with air conditioning, work lights, adjustable steering column; comfortable, fully adjustable operator's seat; doors on both sides; Operating parameters: ▪ Rear-mounted ripper; Ripper width: 2.0 m; Working depth: 0.361 m; ▪ Parallel-lift front blade; Width: 2.35 m; Height: 0.765 m; Ground clearance under blade: 0.509 m; Working depth – 0.136 m; ▪ Center blade; Width – 3.355 m; Height – 0.526 m; Working depth – 0.456 m; Blade clearance – 0.394; Tilt angle – 49.5°; Traverse left – 0.708 m; Traverse right – 0.491 m; Reach left without frame steering – 1.525 m; Reach right without frame steering – 1.865 m; Reach left with frame steering – 2.15 m; Reach right with frame steering – 2.49 m; Lift angle left – 76°; Lift angle right – 117°; ▪ Machine weight ready for operation – 12,800 kg; ▪ Height – 3.24 m; ▪ Maximum length – 8.961 m; ▪ Width – 2.36 m (over tires); Additional equipment included in the price: ▪ Heated FOPS/ROPS cab with air conditioning ▪ Comfortable, heated, air-suspended operator's seat ▪ All-wheel drive (AWD) 6x6 ▪ Parallel front blade ▪ Center blade 3355 mm wide and 522 mm high - FLOATING ▪ 5-tooth rear ripper ▪ Back-up alarm ▪ Lighting for driving on public roads ▪ LED work lights ▪ Orange warning light ▪ Back-up camera Price: 227 000 € without tax