Vyhledávání použitého zařízení Zavřít » Pokročilé vyhledávání

    Umístit poptávku
    Počet inzerátů: 201

    Použité rýpadlo-nakladače Caterpillar 415

    Zde najdete všechny prodejní inzeráty s použitými Caterpillar 415, 415 F 2 rýpadlo-nakladače. Můžete je setřídit podle roku výroby, ceny nebo země či najít další použité modely nebo všechny setříděné podle modelu.

    Čtěte dále Zavřít
    Filtr
    inzeráty/stránka
    Stránka
    Aktivujte si upozornění e-mailem
    Caterpillar 415 specs

    • Caterpillar 415F2 IL (2015)

      Specifications
      Engine
      207 cu in
      3.9 in
      4.33 in
      Engine meets U.S. EPA Tier 4 Final emission standards.
      68 hp
      74 hp
      Cat C3.4B
      74 hp
      No derating required up to 2286 m (7,500 ft).
      68 hp
      68 hp
      72 hp
      73 hp
      73 hp
      69 hp
      307 lb ft
      88 %
      Steering
      Front Wheel
      Hydrostatic
      2.6 in
      4.7 in
      1.4 in
      11 degrees
      26.8 ft in
      36 ft in
      Transmission
      3.4 mph
      5.5 mph
      13 mph
      23 mph
      3.4 mph
      5.5 mph
      13 mph
      23 mph
      Weights
      17637 lb
      359 lb
      14035 lb
      101 lb
      17637 lb
      Tires
      Front: 12.5 80/16.9; Rear: 16.9-24
      Weights
      530 lb
      1015 lb
      198 lb
      2018 lb
      3622 lb
      255 lb
      Hydraulic System
      Variable Flow, Axial Piston
      Closed Center
      33 gal/min
      2973 psi
      2973 psi
      Service Refill Capacities
      42 gal
      10.6 gal
      Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur
      23.8 gal
      4.4 gal
      2.3 gal
      4 gal
      0.4 gal
      2.9 gal
      0.2 gal
      4 gal
      4.4 gal
      Axle Ratings
      50582 lb
      50582 lb
      20233 lb
      20233 lb
      Counterweights - Front - Minimum Recommendations
      255 lb
      no counterweight
      Loader Bucket
      3 in

    • Caterpillar 415F2 (2014)

      Dimentions
      Backhoe
      17.9 ft in
      14.3 ft in
      Specifications
      Engine
      207 cu in
      3.9 in
      4.33 in
      68 hp
      74 hp
      Cat C3.4B
      68 hp
      74 hp
      Engine meets U.S. EPA Tier 4 Final emission standards.
      68 hp
      88 lb ft
      68 hp
      68 hp
      72 hp
      73 hp
      73 hp
      69 hp
      307 lb ft
      Steering
      Front Wheel
      Hydrostatic
      2.6 in
      4.7 in
      1.4 in
      11 degrees
      26.8 ft in
      36 ft in
      Transmission
      3.4 mph
      5.5 mph
      12 mph
      23 mph
      3.4 mph
      5.5 mph
      12 mph
      23 mph
      Weights
      24251 lb
      359 lb
      255 lb
      530 lb
      1015 lb
      15207 lb
      101 lb
      392 lb
      Tires
      Front: 340-80R18 143B R-4; Rear: 500/70R24 157B, R-4
      Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU
      Front: 12.5/80-18-1810 PR I-3; Rear: 19.5L-24 12 PR R4
      Front: 12-16.5 (10 ply); Rear: 19.5L-24 (12 ply) ATU
      Front: 12-16.5 (12 ply); Rear: 19.5L-24 (12 ply) ATU, 20 PITCH
      Weights
      24251 lb
      659 lb
      1642 lb
      Tires
      Front: 340-80R18 143B R-4; Rear: 19.5L-24, 12, ATU
      Front: 340/80R18 XMCL 142A8; Rear: 500.70R24 XMCL 157A8
      Hydraulic System
      Variable Flow, Axial Piston
      Closed Center
      35 gal/min
      3336 psi
      3336 psi
      Brakes
      Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
      Self-adjusting, completely enclosed and sealed.
      Foot operated brake pedals can be interlocked for roading.
      Parking/secondary brakes are independent of the service brake system.
      Parking brake is mechanically applied through an adjustable hand lever located on the right console.
      Service Refill Capacities
      42 gal
      10.6 gal
      Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur.
      23.8 gal
      4.4 gal
      2.3 gal
      4 gal
      0.4 gal
      2.9 gal
      0.2 gal
      4 gal
      5.8 gal
      Standards
      SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
      SAE J1040 MAY94; ISO 3741 1994
      SAE J/ISO 3450; ISO 3450 1996
      ANSI/SAE J1166 OCT98 is 79 dB(A)
      SAE J188 JUN86 is 76 dB(A)
      Axle Ratings
      50582 lb
      50582 lb
      50582 lb
      20233 lb
      20233 lb
      20233 lb
      Engine Features
      Regeneration is passive and does not require any input from the operator or disrupt work.
      Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity.
      Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals.
      Front and rear crankshaft oil seals are lip type Viton and PTFE designs featuring an integral dust lip.
      For durability, inlet valves are nitrided, martensitic chrome silicon steel.
      For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel.
      Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life.
      Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness.
      Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow.
      Direct injection fuel system provides accurate fuel delivery and efficiency.
      Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator.
      Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
      Standard glow plug starting aid system for efficient cold weather starting.
      High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise.
      Higher low end torque for better engine/machine performance.
      Engine is equipped with electric fuel priming pump.

    Zde je kompletní seznam použitých stavebních strojů z podkategorie Caterpillar 415, 415 F 2 rýpadlo-nakladače, které se nabízejí na prodej. Chcete-li přidat inzeráty do oblíbených, nebo porovnat produkty, které vás zaujmou, klepněte na zaškrtávací políčko vedle obrázku použitého stavebního stroje z podkategorie Caterpillar 415, 415 F 2 rýpadlo-nakladače, který se vám zdá zajímavý. Potom vyberte jednu z výše uvedených možností. Chcete-li zúžit výsledky vyhledávání použitých strojů z vybrané podkategorie Caterpillar 415, 415 F 2 rýpadlo-nakladače, nebo změnit váš dotaz, použijte volbu Nové vyhledávání(v horní části stránky).

    Nezapomeňte pravidelně navštěvovat Mascus, protože nové inzeráty nabízející použité nakladače, rýpadlo-nakladače, jeřáby, dempry, nakladače a ostatní silniční a stavební technika se zde objevují každý den.

    Čtěte dále Zavřít